The Manthorpe range of in-line tile ventilators are designed to provide roof space ventilation or an outlet for ventilation ducting through large format concrete roof tile coverings. The range of 4 profiles are universal in design and are compatible with all major UK and Irish tile makes. Available in a range of 4 colours to suit most tile types, the vents are quick and easy to install, taking the place of a single tile with no need to cut the battens.
- Over Fascia Vent
- Circular Soffit Vents
- Eaves Comb Filler
- Felt Support Trays
Over Fascia Vent
Manthorpe’s slim line over fascia ventilator ensures a flow of air into the roof space between the felt and the fascia board. The product is designed with a smooth leading edge allowing it to sit discreetly on top of the fascia board beneath the felt. Versions of the product are available giving both 10,000mm2 and 25,000mm2 of airflow. Either can be used to provide ventilation for flat roof abutments by mounting them in a raised wooden frame at the point where the roof abuts the external wall of the house. Products are robust enough to be used with any roof tile no regardless of the profile and can be fitted with plain tiles or slates. Designed with clear fixing points both versions of the Manthorpe Over Fascia vent come complete with fly-screen and will not crush or distort during fitting.
Circular Soffit Vents
Manthorpe’s Circular Soffit Vent can be slotted into the soffit board prior to installation for new build situations or just as easily retro-fitted into existing soffits. Standard fixing for this product is a simple push twist action into a 70mm hole drilled in the soffit board. The vent features evenly spaced slots small enough to prohibit large insects gaining access but wide enough not to be blocked by debris, paint or water droplets.
Eaves Comb Filler
The Eaves Comb Filler provides a physical barrier to stop birds and large insects from entering the void between the felt and tiles. The product runs continuously along the top of the fascia board above the felt and is nailed into position with the fixing holes provided.
Felt Support Trays
Manthorpe Felt Support Trays are designed to bridge the rafters and provide support for the roofing felt. It eliminates the problem of rotting felt caused by the sagging and retaining of water by the felt at low-level eaves. The 625mm long trays can be fitted to all conventional rafter centres. The Refurbishment Felt Support Tray is designed predominately for replacement of old perished felt at eaves level caused by the sagging and subsequent ‘ponding’ of water. Alternatively the 1.5m long trays can be used in new build situations and suits all rafter centres. Use the felt support tray in conjunction with other products from the Manthorpe range to provide a complete roof ventilation system.
Our Location
Qualplas Limited, Knowsley Road,, St Helens, Merseyside, WA10 4PJ